to rtl_433. These are small, inexpensive, wirelesss (433 Mhz), temperature and humidity sensors. The 592TXR has several different model numbers including 06002RMThese are compatible with Acurite's consoles such as the 01512 that I have as well as Acurite's Acu-Link Internet bridge
which posts to acu-link's web page as well as weatherunderground. I picked up the Acurite 5-n-1 Weather Station, a console, and the internet bridge 
because the support for the 5-n-1 had been added to rtl_433 and the package price was pretty reasonable.There were a number of people interested in decoding the 592TXR, but for some reason, it never got added, so I finally added it and cleaned up the Acurite 5-n-1 weather station decoding. The pull request got merged November 8th, 2015.
I think the temperature only version, the 592TX, should also be supported but I don't have one to test. Please let me know if it decodes successfully or not.
The protocol used by the Acurite 592TXR and the 5-n-1 weather station are very similar. The weather station's messages are one byte longer, but they are basically the same with the same RF signaling characteristics.
3 comments:
I want to read and log the data from my 5 in 1 and some added 06002RM sensors...
Can I do that with a RTL-SDR?
Could you provide the data format for the AcuRite devices?
Thanks.
Yes, you can use rtl_433 with an RTL-SDR stick to decode the messages from the Acurite devices listed above and a bunch of other weather related devices.
This was being discussed very recently in a thread over at WX Forum http://www.wxforum.net/index.php?topic=30139.0
That thread is on the new 06045M lightning sensor which I'm trying to work out the decoding for, a little blind, since I don't have the matching console. However a bunch of rtl_433 discussion in that thread.
Post a Comment